logo tips
  • Hi! user down-picture
FPC/RIGID-FLEX tips * Items designated with an asterisk are required fields.
PCB Type
Flexible PCB
Rigid-Flex Board
tips
The full board are by only one single board or be arrayed with the same or different PCBs
Layers
2 Layers
4 Layers
6 Layers
8 Layers
tips
the number of conductive layers
Board type
Single piece
In Panel
tips
The full board are by only one single board or be arrayed with the same or different PCBs
Size (single)
x
inch'↔mm
pic
Inch”↔mm conversion
If you enter in units of inches and press the [Convert] button, it will be converted into units of millimeters in the quotation form.
X = inch
Y = inch
Quantity (single)
Material
Polyimide Flex+FR4
tips
Base material for PCB
Rigid-Flex Thickness
0.4
0.6
0.8
1.0
1.2
1.6
2.0
2.4
2.8
3.2
Unit: mm
Min Track/Spacing
4/4mil(100μm)
5/5mil(125μm)
6/6mil(150μm)
Min Hole Size
0.15mm
0.2mm
0.25mm
0.3mm
None
Surface Finish
Immersion gold(ENIG)
OSP
Immersion silver(Ag)
tips
Extra process to exposed copper to help solderability
Gold Fingers
Yes
No
Via Process
Tenting vias
Plugged vias
Vias not covered
tips
What is the main reference to process vias by PCBgogo?
1.If you submit gerber file, then we process via exactly according to your file. The three options you chose will be ignored then.
2.For .PCB and .PCBDOC files, it is hard to confirm the via attribute, so we will process via according to the options you selected.

*For Gerber files, this choice is useless.It will be made according to files as default.

Flex Part
FPC Layers
1 Layer
2 Layers
4 Layers
FPC Thickness
0.13
0.15
0.18
0.2
Unit: mm
tips
Thickness for the finished PCB
Coverlay
Yellow Coverlay
White Coverlay
Black Coverlay
  None  
tips
The color of coating material
Silkscreen
White
Black
  None  
tips
The color of text printed
Finished Copper
0.5 oz Cu(18μm)
1 oz Cu(35μm)
1.5 oz Cu(55μm)
2 oz Cu(70μm)
Rigid Part
Solder Mask
Green
Red
Yellow
Blue
White
Purple
Black
Matte black
Matte green
  None  
Silkscreen
White
Black
  None  
tips
The color of text printed
Finished Copper
1 oz Cu (35μm)
2 oz Cu (70μm)
3 oz Cu (105μm)
4 oz Cu (140μm)
Additional Options
Half-cut/Castellated Holes
tips
PTH holes or vias that are cutted through to create a partial or half hole to form an opening into the side of the hole barrel. Generally they are used for mounting a PCB to another one.
Impedance control
tips
The resistance to the flow of current, represented by an electrical network of combined resistance, capacitance and inductance reaction, usually in high-frequency circuits
Other Special
request

Attention please! If you don't note not to add pcb order number on board, we will add it on board by default!

CALCULATE
  • Shipping $
Total
Amount

$0

ADD TO BASKET
CALCULATE
  The price is rough quote. If you need the accurate price with components cost, please register and upload the files.