日本語
A****aro
Indicator video generator board
2088
1
Nov 30.2016, 22:02:49
This board generates a calibration video signal for specific CRT displays.
-
Motor controllerDC motor controller with Arduino interface. Optional encoder signal readback for optimal positioning.2121 0 Nov 29.2016, 19:06:23 -
Arduino mini pro based Network attached AnemometerPersonal Domotic Project. Use an arduino mini pro connected to an anemometer in order to detect and track the current windspeed, temperature and humidity. Network connection via wifi or ethernet module enable the information log to an home server. Relays connector allow to open or close the motorized awning whenever the wind speed exceed a treshold (or whenever a network message requires it).2342 0 Nov 25.2016, 02:19:23 -
WTSFirst sample of our IoT solution project.2139 0 Nov 22.2016, 06:03:19
- Comments(1)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
f****ter
Apr 17.2026, 16:45:44
When I assembled and launched my Indicator Video Generator Board for calibrating old CRT monitors, I ran into a problem—I needed to quickly convert the test signals into a convenient format for further work and demonstration. That’s when https://www.movavi.com/video-converter/mp4-converter.html came to the rescue: I easily converted the generated videos to MP4 without any loss of quality, trimmed the excess, and prepared the files for saving to a USB drive. Now the entire process, from the board to the finished test video, takes a minimum of time, and the result looks crisp even on old screens
