日本語
X****Liu
The question about PCBA for USB-C receptacle.
1301
1
Mar 11.2020, 21:18:30
Hi,
I have a small USB-C. It has 4 main legs which should be soldered (I think), however the length is of such that they don't come close to clearing a 0.8mm PCB thickness. On the attached pictures you can see I've hand soldered them and the solder has sunk. Can it work if the legs of USB-C were solder pasted with PCBA?
Wondering what the process is!
- Comments(1)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
A****min
Mar 17.2020, 10:37:40
Switch to the footprint with oval holes. Remember to include the files with the slotting/routing information for the oval holes when sending it to the fabricator.
