日本語
C****lie
How do I solder a transistor switching circuit on a PCB board?
788
1
May 30.2019, 11:27:04
Certain things need to be known first. Has the PCB been already designed properly, or you are working on a general purpose board? Are you using MOSFET or a general bipolar transistor? What is the switching frequency you are working on?
Many precautions are there to be taken depending on the answers to these questions.
Many precautions are there to be taken depending on the answers to these questions.
- Comments(1)
Upload a photo:You can only upload 1 files in total. Each file cannot exceed 2MB.Supports JPG, JPEG, GIF, PNG, BMP
L****cas
May 30.2019, 11:29:25
If you've designed your PCB board and brought out your PCB, then your main work is done. Now you just need to drill holes on PCB ,for your transistors to fit in the PCB. Now soldering on a PCB is the most easiest thing, just you need to add solder to the terminal legs and the solder pads on PCB. Just make sure that you're not overheating the bjt terminal legs, otherwise it might get overheated and destroyed. Follow some general soldering tips that are readily available on Google and YouTube.
