PCBgogo

logo tips
  • Hi! user down-picture
PCB CAPABILITIES
PCBA CAPABILITIES
PCB LAYOUT CAPABILITIES
PCB& PCBA QUICKTURN SERVICE
PCB PROTOTYPE& MASS PRODUCTION

PCB CAPABILITIES

Full Range of PCB
Capabilities to Meet All of Your
PCB Demands in
PCBGOGO.
PCBGOGO will not only provide you with significant cost savings on prototype PCBs, but it will also insure to meet all your desirable turn-around times. More often than not, we achieve turn-around times that are faster than that of local manufacturers.

Prototype PCBs purchased through PCBGOGO are sourced from the largest prototype PCB manufacturers in China that specialise in producing small volume PCBs, over a short period of time, with a large variety of designs per month. (over 40000 designs/month).

All prototype shipments are done using DHL/FedEx/UPS express shipment services to achieve the fastest and the most reliable delivery.

PCBGOGO PCB Board Fabrication Capabilities
Items PCBA Capabilities Remarks
Layer Count 1-10 layers 1-10 Layers PCB fabrication will be provided online order by PCBGOGO. If your PCB order is over 10layers, please contact your customer service for quotation.
Material FR-4 94V0/ Aluminum For FPC, HDI, ROGERS, HAlOGEN-FREE, HIGH TG ETC., contact your customer service.
Maximum PCB Size 500x1100mm The max. size of PCBGOGO PCB is 50*40cm. and we accept longer PCB board which max. length is 1100MM
Maximum PCB Size 3mm*3mm
Maximum Panel Size 50cm*45cm
Minimum Panel Size 7.5*7.5cm If you need v-cut, this is minimum panel size in PCBGOGO
Tolerance size of board
(outline)
±0.2mm CNC tolerance is ±0.2mm, v-cut tolerance is ±0.5mm
Board Thickness 0.4-2.4mm The thickness we could fabricate is 0.4/0.6/0.8/1.0/1.2/1.6/2.0/2.4
Tolerance thickness of board
( t≥1.0mm)
±10% Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.
Tolerance thickness of board
( t≥1.0mm)
±0.1mm Pay attention: as the capability (PTH, solder mask and others) will add the board thickness, we usually use Plus Tolerance.
Min. Line Width 4mil(0.1mm) Min. Line Width is 0.1mm;In terms of multi-layer PCBs, Min. Line Width for inner-layer is 0.175mm
0.1mm/4mil for outer layer. if the minimum line width is less than 6mil , there will be an extra charge / fee.
Min. Line Space 4mil(0.1mm) Min. Line Spacing is 0.15mm/6mil. If Min. Line Spacing is less than 6mil, it will charge extra fee.
Outer Layer Copper Thickness 35um/70um/105um
(1OZ/2OZ/3OZ)
It means the thickness of copper in outer layer. 1 OZ=35um, 2OZ=70um, 3OZ=105um.
Inner Layer Copper Thickness 35um/50um
(1OZ/1.5OZ)
Default is 1OZ, but if you have special requirement, 1.5 OZ is acceptable.
Drill Diameter Range 0.2-6.3mm Min. Size of drill via CNC is 0.2mm. 6.3mm is maximum size.
Annular Ring ≥0.1mm(4mil) If Annular Ring is smaller but there is enough space, there is no limit for the Annular Ring size. But if there is not enough space coupled with dense lines, the Annular Ring size should be over 0.1mm.
Finished Hole Size 0.2--6.20mm Because the copper will cover the surface of hole, the Finished hole size is smaller than it is in Gerber file.
The Size Tolerance of Finished
Hole (CNC)
±0.08mm Tolerance of Finished Hole Size is ±0.08mm. For example, if the drill in the Gerber file is 0.6mm, the finished drill will be 0.52-0.68mm on standard.
Solder Mask Type LPI LPI is common use in the PCB fabrication.
Min.Width of Legend ≥0.15mm Min. width of legend is 0.15mm, if it is smaller, the legend in the finished board will be not clear.
Minimum Height of Legend ≥0.8mm Min. height of Legend is 0.8mm, if it is smaller, the legend in the finished board will be not clear.
Legend Width/ Height 1:5 The suitable proportion of width and height is good for PCB fabrication.
Space between Trace and
Board Edge
≥0.3mm(12mil Routing: the space between line and frame should be over 0.3mm. V-cut panel: the space between line and v-cut line should be over 0.4mm.
Panelization V-scoring, Tab-routing,
Tab-routing with Perforation
(Stamp Holes)
Leave min clearance of 1.6mm between boards for break-routing. For V-score panelization, set the space between boards to be zero.
Min.aperture in half-hole
technology
0.6mm Half-hole is a special technology and the min. aperture must be over 0.6 mm
PCBGOGO Customers Source

Instant Quote & Order Online

Upload your PCB Files

Got project ready to assembly? Contact us: service@pcbgogo.com

GET PCB QUOTATION NOW