PCBgogo

Electronic Project Engineer's Best Partner!

PCB Fabrication Quote

Start PCBGOGO’s PCB Fabrication instant quote when you place your PCB order. Our full feature custom PCB prototype and manufacturing services are at low cost and affordable. Get instant PCB prototype & fabrication quote now.
* Items designated with an asterisk are required fields.
Instant Quote
Quick Order
Material
Normal FR-4 Board
Aluminum Board
Rogers
HDI(Buried/blind vias)
Copper Base
Substrate Material Testing Report
Structure of
MCPCB
Metal core in the middle
Metal base on the bottom side
Different Design
in Panel
tips
it means- we will charge extra panel costs when there are different kinds in 1 PCB design. For same kinds, it needn't charge.
Size (single)
×
mm
inch”↔mm
pic
Inch”↔mm conversion
If you enter in units of inches and press the [Convert] button, it will be converted into units of millimeters in the quotation form.
X = inch
Y = inch
Quantity (single)
  • 5
  • 10
  • 15
  • 20
  • 25
  • 30
  • 40
  • 50
  • 75
  • 100
  • 125
  • 150
  • 200
  • 250
  • 300
  • 350
  • 400
  • 450
  • 500
  • 600
  • 700
  • 800
  • 900
  • 1000
  • 1500
  • 2000
  • 2500
  • 3000
  • 3500
  • 4000
  • 4500
  • 5000
  • 5500
  • 6000
  • 6500
  • 7000
  • 7500
  • 8000
Other
≥5 ㎡ to manually enter the number
Panel Way
Single piece
Panel by Customer
Panel by PCBgogo
Panel Way:
x pcs
Edge Rails: min 5mm
Route Process:
The above panel way and panel size are for reference only which shall be subject to the review of our PCB engineer.
Panelization Detail:
Panel size: 0.00 X 0.00 mm
0 panels = 0 pcs individual PCBs
Image for panelized board ↓ (for reference only)
The panel quantity is 0, which is not allowed to fabricate.
Three options:
To achieve the best production efficiency, we recommend that the length/width of your panel size should not over 500mm.
tips
The full board are by only one single board or be arrayed with the same or different PCBs

pic

 
Panel size: 0.00 X 0.00 mm
Panelization Detail
X-out Allowance in Panel
(e.g. Panel in 2*3, size of the break-away rail, total 5 panels=total 30 individual boards)
Route Process
X-out Allowance in Panel
Layers
1 Layer
2 Layers
4 Layers
6 Layers
8 Layers
10 Layers
12 Layers
14 Layers
 
FR4-TG
TG 130
TG 150
TG 170
S1000H TG 150
S1000-2M TG 170
Thickness
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.4
2.8
3.0
3.2
3.6
3.8
4.0
Unit: mm
Min Track/Spacing
3/3mil
4/4mil
5/5mil
6/6mil
8/8mil ↑
Min Hole Size
0.15mm
0.2mm
0.25mm
0.3mm ↑
0.8mm ↑
1.0mm ↑
No Drill
Solder Mask
Green
Red
Yellow
Blue
White
Purple
Black
Matte black
Matte green
  None  
Silkscreen
White
Black
Yellow
  None  
Gold Fingers
Yes
No
Bevelling
No
Yes (20°)
Yes (30°)
Yes (45°)
HASL with lead
HASL lead free
Immersion gold(ENIG)
OSP
Hard Gold
ENEPIG
Immersion silver(Ag)
None
*The above options are only Gold fingers Surface Finish
Thickness of
Immersion Gold
1U"
2U"
3U"
1U"=0.0254um
Au/Ni thickness
Au:10U"/Ni:120U"
Please choose other options of Gold /Nickel thickness here
1U"=0.0254um
Au:3U"/Ni:120U"
Au:5U"/Ni:120U"
Au:10U"/Ni:120U"
Au:15U"/Ni:120U"
Au:20U"/Ni:120U"
Au:25U"/Ni:120U"
Au:30U"/Ni:120U"
Please Enter | Au: U"/Ni: U"
Surface Finish
HASL with lead
HASL lead free
Immersion gold(ENIG)
OSP
Hard Gold
ENEPIG
Immersion silver(Ag)
None
Thickness of
Immersion Gold
1U"
2U"
3U"
1U"=0.0254um
Au/Ni thickness
Au:3U"/Ni:120U"
Please choose other options of Gold /Nickel thickness here
1U"=0.0254um
 
Tick "Yes" to agree PCBGOGO to replace "HASL" to "ENIG" randomly because of factory fabrication requirement.
Yes
No
Via Process
Tenting vias
Plugged vias
Vias not covered
Tips: If you use .PCB and .PCBDOC format file, we will fabricate the drills in PCBs as your selected options. This option is invalid if your file is Gerber file , as we will do according your Gerber file.
Finished Copper
1 oz. Cu
2 oz. Cu
3 oz. Cu
4 oz. Cu
5 oz. Cu
6 oz. Cu
7 oz. Cu
8 oz. Cu
9 oz. Cu
10 oz. Cu
Inner Copper
1 oz
1.5 oz
2 oz
3 oz
4 oz
5 oz
6 oz
PCB Assembly
Yes
No
The above PCBs need assembly service
SMD-stencil
Yes
No
Order together with PCB
+Additional Options (Castellated holes ,Edge Plating ,impedance control, buried / blind vias,Custom Stackup,UL Marking)
Below options, their cost is not included in the online quotation
Peelable Soldermask
  • None
  • Top side
  • Bottom side
Coating material could be removed after board through wave soldering
UL Marking
  • None
  • Yes - add to top silkscreen
  • Yes - add to bottom silkscreen
  • Yes - add to top solder mask
  • Yes - add to bottom solder mask
  • Yes - add to top copper
  • Yes - add to bottom copper
  • Yes - as PCBGOGO default
Marking of UL on board
Do not add PCB order number
Do not add PCB order number on board( extra +$1)
Half-cut/Castellated Holes
PTH holes or vias that are cutted through to create a partial or half hole to form an opening into the side of the hole barrel.Generally they are used for mounting a PCB to another one.
Edge Plating
The partial edge of the PCB plated with copper
Impedance control
The resistance to the flow of current, represented by an electrical network of combined resistance, capacitance and inductance reaction,usually in high-frequency circuits
Halogen-Free
Halogen-free PCB, it should have less than 900 parts per million of chlorine or bromine, with less than 1,500 ppm of total halogens.
Buried/blind vias
High-density multi-layer PCBs may have microvias: blind vias are exposed only on one side of the board, while buried vias connect internal layers without being exposed on either surface.
Custom Stackup
Apply to multilayer pcbs only.Stack-up refers to the arrangement of copper and insulating layers that make up a PCB before starting board layout design.
Carbon Mask
Carbon ink creates surface resistors and a protective contact surface for switches.
Via in pad
The microvias filled with non-conductive epoxy then capped and plated over
Via filled with resin
The microvias filled with epoxy
Countersinks/Counterbores
Countersink is a cone shaped hole in PCB for the tapered head of a screw. Counterbore is flat-bottomed hole and its sides are drilled straight down, usually used to fit a hex-headed cap or screw
Z-axis milling
A variable level elevation can be milled at the edge or within a circuit board. This is called Z-axis milling.
Confirm work file
work file is the Gerber file after PCBGOGO optimizes your PCB project, and we will have customers confirmed their work file, the lead time of your order will be counted by the time of work file confirmed
+ Add PO No.
Other Special
Request

Your number will be added to the board. Kindly leave a note if you do not require this additional service.

SMD-Stencil Order together with PCB
Stencil type
Framework
Non-framework
Size (mm)
  • 370×470mm (Valid area 190×290mm)
  • 420×520mm (Valid area 240×340mm)
  • 450×550mm (Valid area 270×370mm)
  • 584×584mm (Valid area 380×380mm)
  • 550×650mm (Valid area 350×450mm)
  • 736×736mm (Valid area 500×500mm)
  • 400×600mm (Valid area 220×400mm)
  • 400×800mm (Valid area 220×600mm)
  • 400×1000mm (Valid area 220×760mm)
  • 500×800mm (Valid area 320×600mm)
  • 400×1200mm (Valid area 220×1000mm)
  • 400×1400mm (Valid area 220×1200mm)
  • 500×1200mm (Valid area 320×1000mm)
  • 500×1400mm (Valid area 320×1200mm)
Stencil Side
Top
Bottom
Top+Bottom(On Single Stencil)
Top & Bottom(On Separate Stencil)
Quantity
Thickness
0.10mm
0.12mm
0.15mm
0.2mm
Existing fiducials
None
Half lasered
Lasered through
Electropolishing
Yes
No
Other Special
Request
PCB Assembly The above PCBs need assembly service
Turnkey
We supply the parts
Kitted or Consigned
You supply parts
Combo
You supply some parts we do the rest
Number of PCB
Stencil
   Yes   
Number of
Unique Parts
tips
Fill in the exact quantity or 0 to wait for manually review.
Please enter the total number of single PCBs.(not the set number)
Number of SMD Parts
tips
Total quantity of SMD components for each board.
Number of Through-Hole Parts
tips
Total quantity of through holes components for each board.
Panel Way
Single piece
Panelized PCBs
tips
If single pcb qty is more than 20pcs or the part solering points are less than 100,then we suggest do panel.Or we may charge extra wastage fee.
Assembly Side(s)
Single Side
Double sides
tips
Are parts mounted on one side only, or both sides?
X-ray Test
Yes
No
Conformal coating
Yes
No
+ Add PO No.
Detailed information
of assembly

Price does not include PCB fabrication or the cost of components, exact quotation will be updated after all the files you uploaded pass review or contact service@pcbgogo.com for help.

CALCULATE
  • Shipping $
Total
Amount

$0

Currency
ADD TO BASKET
CALCULATE
The price is rough quote. If you need the accurate price with components cost, please register and upload the files.
The EUR and GBP prices are for reference only.
The final payment price is up to the PCBGOGO transaction exchange rate.
The exchange rate will be updated once a day and the price is shown according to the current exchange rate just for your reference. The payment is to be settled in dollars.
Please fill in the layer order from top to bottom here.

Please fill in the layer order from top side view tobottom side according to
the layers name in your file.

Submit